氫氣發生器，空氣發生器，氮氣發生器，氮氫空一體機，標氣，煉廠氣，乙酸乙酯，醫療器械，環氧乙烷，三甲胺，液化石油氣，二甲醚，甲縮醛，乙縮醛，室內空氣TVOC，乙酸乙酯

氫氣發生器
氫氣發生器 詳細信息：

HH-300氫氣發生器是浩瀚色譜研發的一款經濟適用型，是氣相色譜儀理想的配套產品。市場占有率高，性能穩定。

HH-300儀器特點：
1.操作簡便，安全，一次性加堿，日常使用只需補充蒸餾水，啟動電源開關即可產氫。
2.氣路部分全部采用不修鋼管，（電解拋光，超音清洗），設有過壓保護裝置，兩級凈化。
3.獨特的防返液裝置，確保儀器無返液現象。
4.桶式電解池，電解材料選用進口特制貴金屬，有效的提高電解效率，恒定池體溫度，促使電解池使用壽命大大提高。
5.輸出流量穩定，自動跟蹤，純度不衰減，可連續使用。

技術參數：
氫氣純度：＞99.99％
氫氣流量：0-500ml∕min
輸出壓力：0-0.4Mpa(出廠設定0.4Mpa)；
大功率：300W
電源：220V±10％﹔50HZ±5％
環境條件：
環境濕度：40℃﹔
相對濕度：≤85％﹔
無大量粉塵及腐蝕性氣體。
外形尺寸：：450x190x380mm




Hydrogen generator
Hydrogen generator Details:

HH-300 hydrogen generator is an economical and applicable type developed by Haohan Chromatography, and is an ideal supporting product for gas chromatograph. High market share and stable and reliable performance.

HH-300 instrument features:
1. Simple operation, safe and reliable, one-time alkali addition, daily use only needs to add distilled water, start the power switch to produce hydrogen.
2. All the gas path parts are made of non-repaired steel pipes (electrolytic polishing, ultrasonic cleaning), equipped with over-pressure protection devices, and two-stage purification.
3. Unique anti-returning device to ensure that there is no return to the instrument.
4. Barrel type electrolytic cell. The imported special precious metal is used as the electrolytic material, which can effectively improve the electrolytic efficiency and keep the temperature of the cell body, which greatly promotes the service life of the electrolytic cell.
5. The output flow is stable, automatic tracking, purity does not decay, and can be used continuously.

technical parameter:
Hydrogen purity: >99.99%
Hydrogen flow rate: 0-500ml∕min
Output pressure: 0-0.4Mpa (factory setting 0.4Mpa);
Maximum power: 300W
Power supply: 220V±10%; 50HZ±5%
Environmental conditions:
Environmental humidity: 40℃;
Relative humidity: ≤85%;
No large amount of dust and corrosive gas.
Dimensions: 450x190x380mm